The Prochem Steempro Powermax Standard Starter Pack contains everything you need to start professional carpet and upholstery cleaning.
1 x Prochem Steempro Powermax
1 x One day training course voucher (value £155.00)
1 x AX1021 - Glidemaster Hand Tool
1 x AC1044 - Large mesh & accessory bag
1 x CP4301 - 5L Rondo-Matic Industrial pressure sprayer
1 x BM4302 - Spray-Matic adjustable hand sprayer 1.25L
1 x ST3401 - Tarpaulin, grey canvas 1.8mx1.8m
1 x PA3401 - Carpet Pile Brush 15”, blue (head only)
1 x HG3401 - Handle, 5ft for PA3401
1 x CN3402 - 30ml dispenser for 5L container
1 x CM3503R - Red Bucket 10L
1 x CM3503W - White Bucket 10L
1 x PR3401 - PSK Professional Spotting Kit
2 x S775-05 - Extraction Plus
2 x S709-05 - Multi Pro
1 x S781-05 - Liquid Woolsafe
1 x S760-05 - Liquid Defoamer
1 x B109-05 - Fibre & Fabric Rinse
1 x B124-05 - Odour Fresh
The Prochem Steempro Powermax combines dual 3-stage vacuum power with a long life 170psi induction diaphragm pump.
The ideal high power carpet extractor for the single operator, the Steempro Powermax incorporates a large 35 litre solution tank in a compact body design for maximum efficiency and portability.
With an internal "whisper quiet" silencer and upright mounted motors with exclusive intercooler unit the Steempro Powermax represents the state-of-the-art in professional carpet soil extractors.
The optional Heat "n" Run in-line heat exchanger provides continuous hot cleaning solution.
The machine comes complete with hoses and 2-jet Glidemaster stainless steel wand.
Dual 3-stage vacuums
170 psi induction diaphragm pump
Whisper quiet in-built silencer
Top handle-mounted switches
Automatic vacuum shut-off
Scuff resistant granite finish
Clip-on in-line heater (optional)
Free Training Voucher with this machine
Solution tank: 35 litres
Recovery tank: 26 litres
Solution pressure: 11.7 bar (170 psi) induction motor pump
Vacuum motor: 2 x 3 stage by-pass
Water lift / airflow: 5588 mm (220") / 113 l/s (240 cfm)
Hose assembly: 7.6 metres (25 ft)
Carpet wand: 30 cm (12") dual jet S-bend
Tank construction: Polyethylene with aluminum baseplate
Wheels: Rear stair climbing 25 cm (10") non-marking
Front castors: 10 cm (4") non-marking
Power cable: 7.6 metres (25 ft)
Weight: 38 kilos
Shipping weight: 45 kilos
Dimensions: 89 x 78 x 45 cm (h x l x w)
Shipping dimensions: 90 x 80 x 49 cm (h x l x w)
Warranty: 2 years on tank, 1 year on parts
