Prochem Clensan is a specially formulated multi-surface sanitiser and deodoriser for carpets, upholstery, floors and hard surfaces.
It effectively eliminates bacteria and odours caused by microbial spoilage.
Prochem Clensan"s biocidal formula is approved to EN1276 and is effective against a wide range of harmful organisms including bacteria and viruses.
Dilute with water and apply by sprayer before rinsing.
1 Litre Prochem Clensan is ready to use.
5 litre dilution rate* (all surfaces): Mix 50ml of Clensan per litre of water. (1 part Clensan to 20 parts water). Solutions should always be freshly prepared.
*Norovirus: Mix 160ml of Clensan per litre of water and allow 60 minutes contact time for effective disinfection.
Carpets & Upholstery: Always pre-test carpet or fabric with ready-to-use Clensan solution for colour fastness and texture change before proceeding.
Apply Clensan solution by spray applicator to carpet or fabric surface and allow 5 to 15 minutes contact time for effective sanitising.
Extraction rinse carpet or fabric with B109 Fibre & Fabric Rinse.
Floors and Hard Surfaces: Always pre-test surface to be treated with ready-to-use Clensan solution before proceeding.
Apply Clensan solution by spray applicator and allow 5 to 15 minutes contact time for effective sanitising.
Wipe hard surfaces or rinse floors with water then mop or extract with wet pick-up vacuum.
When using scrubber driers always check recovery tank for excessive foam and use defoamer if required.
Clensan solutions should always be freshly prepared.
Do not mix Clensan with other chemicals or detergents
The dilution rate for 5 litre Prochem Clensan is 1 to 20.
pH 7.5
Prochem Clensan is a clear liquid with herbal lemon fragrance.
Approved to EN1276.
